Cheap price Transparent Hot Glue Sticks - EVA Hot Melt Glue Stick for Electronic Accessories Bonding in DIY Draft – Newera
Cheap price Transparent Hot Glue Sticks - EVA Hot Melt Glue Stick for Electronic Accessories Bonding in DIY Draft – Newera Detail:
Features of hot melt glue sticks:
1. Non-toxic and tasteless, it is an environmentally friendly chemical product.
2. Advantages such as high bonding strength, fast speed, etc. are favored.
3. Can be repeated operation, no pollution, no odor.
4. Can be bent, not easy to break
5. Hot melt glue stick is a 100% solid content adhesive that can be glued in the molten state to get proper flow and wetting.
6. The commonly used hot melt adhesives are EVA based formulations. Such products usually exhibit relatively short open times (typically less than 10 seconds) and very fast curing speed.
7. Gradually lose most of the surface tackiness after fully curing. When the remaining surface has a low viscosity, the edge of the bonding area can be prevented from being contaminated by foreign matter in the future storage or use.
APPLICATION
Hot melt glue sticks are widely used in a variety of manufacturing industries, including packaging, book binding, woodworking, DIY, sanitary, construction, automotive, electronics, footwear, fabric multilayers, product portfolios, tapes, and labels.
Pay attention to the following tips when using hot melt glue sticks daily:
The hot melt glue stick is generally required to be used with the hot melt glue gun of the same specification. First, the hot melt glue stick should be put into the hot melt glue gun and power on for 3-5 minutes to make the hot melt glue stick in The hot melt glue gun is fully heated to reach the melting point, and then the melted hot melt adhesive is applied to the workpiece to be adhered. When the temperature drops below 75°C, the hot melt adhesive will solidify to achieve adhesion. Tips in using hot melt glue sticks Hot melt glue sticks can be used repeatedly and are environmentally friendly.
1. The hot melt glue stick should be fully preheated in the hot melt glue gun.
2. The hot-melt glue stick must be fully melted before it can be squeezed onto the workpiece, otherwise, the characteristics of the hot-melt glue will not be fully utilized [It is strictly forbidden to burn with a lighter, and a hot-melt glue gun must be used].
3. The hot melt glue stick should not be used for a short time in the hot melt glue gun. The hot melt glue gun should be upright upright with the tip of the hot melt glue gun to prevent the hot melt glue stick from melting and returning [Unused hot melt glue Don’t pull out the stick].
Several measures to avoid improper use of hot melt glue sticks:
4. Hot melt glue stick is a kind of adhesive that is convenient for storage and transportation, and its shelf life can generally reach more than 12 months. If it is not used for a long time, it should be stored in a cool place.
5. If the hot melt glue stick is too hard due to being stored for too long, the hot melt glue stick should be soaked in appropriate warm water to alleviate the problem of the hot melt glue stick due to long storage.
Recommend products
Certificate
Company Information
Product detail pictures:
Related Product Guide:
Demystify! The hidden corners of the die cutting industry
Recently, the price of raw materials has risen sharply, and the plastic market has started a collective carnival mode.
We know that we only thrive if we can easily guarantee our combined cost competiveness and high-quality advantageous at the same time for Cheap price Transparent Hot Glue Sticks - EVA Hot Melt Glue Stick for Electronic Accessories Bonding in DIY Draft – Newera , The product will supply to all over the world, such as: South Korea, Spain, Canberra, As a way to use the resource on the expanding info in international trade, we welcome prospects from everywhere on the web and offline. In spite on the high quality objects we offer you, effective and satisfying consultation service is supplied by our qualified after-sale service group. Item lists and in depth parameters and any other info weil be sent to you timely for the inquiries. So you should make contact with us by sending us emails or call us when you've got any questions about our organization. ou could also get our address information from our site and come to our enterprise. We get a field survey of our merchandise. We're confident that we are going to share mutual accomplishment and create solid co-operation relations with our companions within this market place. We're seeking forward for your inquiries.
By Christina from Paraguay - 2018.05.15 10:52
Problems can be quickly and effectively resolved, it is worth to be trust and working together.
By Jenny from Swansea - 2017.06.19 13:51
