China manufacturer supply 7mm transparent hot glue sticks
Features
1. Non-toxic and tasteless, it is an environmentally friendly chemical product.
2. Advantages such as high bonding strength, fast speed, etc. are favored.
3. Can be repeated operation, no pollution, no odor.
4. Can be bent, not easy to break
5. Hot melt glue stick is a 100% solid content adhesive that can be glued in the molten state to get proper flow and wetting.
6. The commonly used hot melt adhesives are EVA based formulations. Such products usually exhibit relatively short open times (typically less than 10 seconds) and very fast curing speed.
7. Gradually lose most of the surface tackiness after fully curing. When the remaining surface has a low viscosity, the edge of the bonding area can be prevented from being contaminated by foreign matter in the future storage or use.
Application
Hot melt glue sticks are widely used in a variety of manufacturing industries, including packaging, book binding, woodworking, DIY, sanitary, construction, automotive, electronics, footwear, fabric multilayers, product portfolios, tapes, and labels.
Storage Condition
- 1. General hot melt glue sticks are not resistant to high temperatures, so they should be stored in a cool place. It is advisable to store the ambient temperature between minus 7°C and 50°C.
- 2. Avoid exposure to the sun in the sun or direct sunlight, it is recommended not to use hot melt adhesive stick not prolonged contact with air, long exposure to the air of the hot melt adhesive stick on the surface of the oxide film,although it does not affect its The main adhesive use, but its appearance will have a certain impact. Transparency will weaken relatively.
- 3. The hot melt adhesive can be stored for one year if stored under the above conditions.
Packing Details
Company Information