High Quality Hot Melt Glue - EVA Hot Melt Glue Stick for Electronic Accessories Bonding in DIY Draft – Newera
High Quality Hot Melt Glue - EVA Hot Melt Glue Stick for Electronic Accessories Bonding in DIY Draft – Newera Detail:
Features of hot melt glue sticks:
1. Non-toxic and tasteless, it is an environmentally friendly chemical product.
2. Advantages such as high bonding strength, fast speed, etc. are favored.
3. Can be repeated operation, no pollution, no odor.
4. Can be bent, not easy to break
5. Hot melt glue stick is a 100% solid content adhesive that can be glued in the molten state to get proper flow and wetting.
6. The commonly used hot melt adhesives are EVA based formulations. Such products usually exhibit relatively short open times (typically less than 10 seconds) and very fast curing speed.
7. Gradually lose most of the surface tackiness after fully curing. When the remaining surface has a low viscosity, the edge of the bonding area can be prevented from being contaminated by foreign matter in the future storage or use.
APPLICATION
Hot melt glue sticks are widely used in a variety of manufacturing industries, including packaging, book binding, woodworking, DIY, sanitary, construction, automotive, electronics, footwear, fabric multilayers, product portfolios, tapes, and labels.
Pay attention to the following tips when using hot melt glue sticks daily:
The hot melt glue stick is generally required to be used with the hot melt glue gun of the same specification. First, the hot melt glue stick should be put into the hot melt glue gun and power on for 3-5 minutes to make the hot melt glue stick in The hot melt glue gun is fully heated to reach the melting point, and then the melted hot melt adhesive is applied to the workpiece to be adhered. When the temperature drops below 75°C, the hot melt adhesive will solidify to achieve adhesion. Tips in using hot melt glue sticks Hot melt glue sticks can be used repeatedly and are environmentally friendly.
1. The hot melt glue stick should be fully preheated in the hot melt glue gun.
2. The hot-melt glue stick must be fully melted before it can be squeezed onto the workpiece, otherwise, the characteristics of the hot-melt glue will not be fully utilized [It is strictly forbidden to burn with a lighter, and a hot-melt glue gun must be used].
3. The hot melt glue stick should not be used for a short time in the hot melt glue gun. The hot melt glue gun should be upright upright with the tip of the hot melt glue gun to prevent the hot melt glue stick from melting and returning [Unused hot melt glue Don’t pull out the stick].
Several measures to avoid improper use of hot melt glue sticks:
4. Hot melt glue stick is a kind of adhesive that is convenient for storage and transportation, and its shelf life can generally reach more than 12 months. If it is not used for a long time, it should be stored in a cool place.
5. If the hot melt glue stick is too hard due to being stored for too long, the hot melt glue stick should be soaked in appropriate warm water to alleviate the problem of the hot melt glue stick due to long storage.
Recommend products
Certificate
Company Information
Product detail pictures:
Related Product Guide:
Recently, the price of raw materials has risen sharply, and the plastic market has started a collective carnival mode.
Demystify! The hidden corners of the die cutting industry
Well-run devices, expert profits group, and better after-sales companies; We have been also a unified huge family, everybody keep on with the organization worth "unification, determination, tolerance" for High Quality Hot Melt Glue - EVA Hot Melt Glue Stick for Electronic Accessories Bonding in DIY Draft – Newera , The product will supply to all over the world, such as: kazan, India, Sri Lanka, Our company, is always regarding quality as company' s foundation, seeking for development via high degree of credibility , abiding by iso9000 quality management standard strictly , creating top-ranking company by spirit of progress-marking honesty and optimism.
By Martha from French - 2017.06.25 12:48
We have worked with many companies, but this time is the best,detailed explanation, timely delivery and quality qualified, nice!
By ron gravatt from Atlanta - 2018.06.26 19:27